• 1
• 2
• 3
• 4
• 5

Features

• From the lineup including a variety of products, you can select the most suitable type to match the connection method and I/O specifications of external devices.
• The protector covering the terminal block prevents the user from touching charged parts, allowing direct installation to a target machine

В 

• 1
• 2
• 3
• 4
• 5

• 1
• 2
• 3
• 4
• 5

Features

• 8 conductor RJ-45 female to female, shielded,fits standard type Keystone Wall Plate.
• Can be used in patch panels, wall jacks, or to extend cable lengths.

В 

• 1
• 2
• 3
• 4
• 5

Features

• This twisted pair cable is compliant with the 1000BASE-T physical layer standard. It is covered with a double-shield and is highly resistant to external noise.
• Available in lengths starting from 0.5m and 1m up to 100m in 1 meter increments.

В 

• 1
• 2
• 3
• 4
• 5

Features

• NZ2EHG-T8 is compatible with transmission rates of 10 Mbps/100 Mbps/1 Gbps.
• NZ2EHF-T8*1 is compatible with transmission rates of 10 Mbps/100 Mbps (available soon).
• These switching hubs comply with IEEE802.3ab (1000 BASE-T), IEEE802.3u (100 BASE-TX), IEEE802.3 (10 BASE-T), and 1000 BASE-T standards.
• AutoMDI/MDI-X and auto-negotiation are available.
• The automatic power adjustment function cuts a maximum of about 80 percent *2 of power consumption.
• No air-cooling fan is used. Nevertheless, the operable ambient-temperature range is as wide as 0 to 50В°C.
• Quick detach mechanism allows easy DIN rail attachment and detachment.

В 

• 1
• 2
• 3
• 4
• 5

Features

• Using the head module, remote stations can be created from MELSEC-L Series I/O modules and intelligent function modules. Money can be saved on spare parts because the modules are the same as used with the CPU units.
• Create remote I/O stations that just fit the application while maintaining the flexibility to grow. Save on wiring costs by condensing remote I/O to a single station.
• Access to other stations by way of remote I/O stations is possible, thus increasing the effectiveness of GX Works2.
• Troubleshooting, even after a power failure, is simple. Error information from remote I/O stations is automatically preserved by the master station.

• 1
• 2
• 3
• 4
• 5

Features

• Seamless Message Protocol (SLMP) compatible Ethernet equipment can be connected to the CC-Link IE Field network. This enables the use of a variety of equipment, like vision sensors and RFID controllers.
• Use a web browser to set station numbers and Ethernet options, monitor devices, and view test/error history.

В 

• 1
• 2
• 3
• 4
• 5

Features

• Operates as either a master or local station. Perfect for managing remote I/O control and distributed control.
• Devices from other stations can easily be accessed through transient communication using dedicated instructions.
• Function blocks for transient communication are available to further simplify messaging.
• The network can ensure 32bit data integrity using the station-based block data assurance function. (This ensures that pairs of word data are updated together during link refresh.)

В