Choose Category        






GT 16

Category: Graphic Operation Terminal
Energy Measuring Unit

Category: CC-LINK

Feature

  • Wide selection to sulte the number of circuits
  • Central survellance & energy saving analysis
  • Sensor cable
  • Split-type 5A current sensor
Melsec Q Series QE81WH

Category: CC-LINK Safety

Feature

  • By mounting the energy measuring module onto the open slot of the base unit, measuring instrument can be added without changing the layout in the control panel.
  • With a communication unit, communication cable and creation of a communication program are no longer needed, cost reductions can be realized by wire savings and engineering workload reductions.
  • Allows for easy specific energy consumption*1 management by matching the “production information” of the CPU unit with the “energy information” of the energy measuring module.Since measured data is automatically collected in a buffer memory at 250ms, detailed specific energy consumption management is also available.
  • Allows for easy graphic display of specific energy consumption with a graphic operation terminal (GOT) installed on the control panel at the manufacturing site.*2 Combination with the “high-speed data logger module (QD81DL96)” allows specific energy consumption analysis to be easily performed with a PC.
Sensor connector

Category: CC-LINK /LT
Spring clamp terminal block

Category: CC-LINK /LT

Features

  • Retightening is not required. The applicable wire size is 0.3 to 1.5mm2 (AWG22 to 16).
  • Two-piece structure (The terminal block section is removable.)
  • Input modules with positive/negative common shared.
  • Source type output module (8 points) is available.
  • The modules are mountable in six orientations

В 

Screw terminal block

Category: CC-LINK /LT
Master modules

Category: CC-LINK /LT
Spring clamp terminal block

Category: Melsec Q Series

Features

  • The remote I/O module which has obtained the highest safety level applicable to programmable controllers, and the safety-related system with high security can be configured.
  • The system complying with Category 3 or Category 4 of EN954-1 can be configured by the combination of wiring and parameters.

В 

Screw terminal block

Category: Melsec Q Series

Features

  • The system complying with Category 3 or Category 4 of EN954-1 can be configured by the combination of wiring and parameters.
  • The fail-safe function is equipped. When a failure occurs inside the module, the self-diagnostics function detects the failure and turns OFF the output.
  • A dark test (contact stuck diagnostics) enables an error diagnostics including external safety devices.

В 

Screw/2-piece terminal block

Category: Energy Measuring Unit

Features

  • The I/O terminal block is removable.
  • The 2-piece structure allows easy servicing as the module can be replaced without rewiring.

В 

 1  2   Next